17Getting started
When two phones are connected to the Parrot ASTEROID Smart, one of them
becomes the main phone and the other is the secondary phone. By default, the main
phone is the one with the oldest pairing to the Parrot ASTEROID Smart.
You can receive calls to the main or secondary phones.
Only the phonebook for your main phone may be accessed through the Parrot
ASTEROID Smart. You can only make calls using the main phone. However, you can
easily switch between the connected phones. To do so :
1. Tap Phone.
2. Tap , then Phone.
3. Select the main phone.
Using the Application safety control option
The option Application safety control prevents videos broadcast and applications
requiring increased attention while you are at the wheel.
There are then two ways for looking at a video or using an application not dedicated to
navigation:
Turn off your vehicle's ignition and engage the handbrake
or
Press on Settings > Advanced settings > Safety and disable the option Application
safety control.
Note: The Application safety control option is re-enabled each time to start up your
vehicle.
Synchronising the phonebook
With most of the
Bluetooth
phones, the phonebook is automatically synchronized in
the system’s memory. Each time you change your directory, synchronization will start
automatically the next time it is connected.
Warning: Only the contacts stored in the phone memory are synchronized. If your contacts
are stored in your SIM card memory, transfer them onto your phone memory.
The automatic synchronization is limited to 5000 contacts (or phone numbers) for
each paired phone.
To Next Page
Loading...
Need help?
General
