27Internet
Internet
Warning: Internet connection via a 3G key requires a subscription offer with a telephone
operator. Using this service can result in significant roaming charges. Check the conditions
of your subscription and consumption tracking with your operator. Parrot cannot be held
responsible for any associated costs
Connection with a 3G/4G key
Note: Refer to the compatibility section of the Parrot ASTEROID Smart on our website to
get the list of 3G / 4G keys compatible with the Parrot ASTEROID Smart.
Note : To guarantee an optimal reception quality we recommend you do not connect your
internet USB key 3G on the Parrot ASTEROID directly : use the USB cable to install your
device on the dashboard (or any other open area).
1. Connect a 3G / 4G key to the Parrot ASTEROID Smart with a USB cable.
> A pop-up will appear.
2. Enter your PIN code (if required) then tap ENTER. Check the Memorise option if
you do not want to enter the PIN code each time you use the Parrot ASTEROID
Smart with this 3G / 4G key.
Note: You will be able to change this setting by selecting Settings > Wireless & networks >
Mobile networks settings. Among the mobile access devices, select your 3G / 4G key, tap
Forget PIN code > Forget.
3. If necessary, select your APN (Access Point Name) from the suggested list. This
information is available in the documentation provided with your 3G / 4G key. If
your APN is not in the list, you can add it by selecting Settings > Wireless &
networks > Mobile networks settings.
4. Among the mobile access devices, select your 3G / 4G key.
5. Select Access point > Other > Preset access points.
6. Wait for approximately 30 seconds until the connection is established. You can
also press the button and browse the menus while the connection is being
established.
To Next Page
Loading...
Need help?
General
