23Music
While playing a music track (except audio players connected using a jack / jack cable):
slide your finger to the right to skip to the next track ;
slide your finger to the left to get back to the previous track.
Note : If you are using the Parrot ASTEROID Smart with an audio player connected via
Bluetooth, these commands are only available if your audio player supports the AVRCP
profile (Audio/Video Remote Control Profile).
iPod
Note : If you are using the Parrot ASTEROID with the iPod Mini, iPod Photo, iPod 3G and
iPod Shuffle, then connect your iPod to the Parrot ASTEROID using the Jack / Jack cable.
1. Connect the USB / iPod extension lead to the USB cable connected to the white
USB port and connect your iPod to it.
2. Tap Music and select iPod. You can also tap Browse to browse through the content
of your iPod.
3. Tap a track to start playback.
Note : Tap to adjust several settings (audio, repeat, random).
USB storage device
Note : Make sure your storage device is formatted for FAT32 to use it with the Parrot
ASTEROID Smart.
The Parrot ASTEROID Smart is compatible with the majority of USB keys / MP3 audio
player / external hard drive. There is no restriction in terms of capacity of USB keys.
Only MP3, AAC or WMA formats are supported.
1. Connect your USB storage device to the Parrot ASTEROID Smart using the USB
cable or the USB connectors on the back of the car stereo
2. Tap Music and select USB. You can also tap Browse to browse through the
content of your USB device.
3. Tap a track to start playback.
Note : Tap to adjust several settings (audio, repeat, random).
SD card
Note : Make sure your SD card is formatted for FAT32 to use it with the Parrot ASTEROID
Smart.
The SD card capacity must not exceed 32Gb. Only MP3, AAC, WAV, OGG or WMA
To Next Page
Loading...
Need help?
General
