Parrot ASTEROID Smart User Manual

49Troubleshooting
Troubleshooting
Before you begin
Make sure the “Goodbye” message is displayed on the Parrot ASTEROID Smart screen
when you turn the ignition off. Refer to the Checking the wiring section for more
information.
Reset the Parrot ASTEROID Smart. To do so, remove the faceplate then use a paper
clip to press the Reset button. Hold down the Reset button for 3 seconds.
Make sure you have the latest software update on your Parrot ASTEROID Smart. To do
so, select Settings > About > Version. Compare this number with the one on the Parrot
ASTEROID Smart support page on our website.
Problems while using the phone function
Make sure your phone is compatible with the Parrot ASTEROID Smart. To do so, refer
to the compatibility list of the Parrot ASTEROID Smart.
If your phone is compatible with the Parrot ASTEROID Smart and if you already have
the latest software update:
1. Erase the memory of the Parrot ASTEROID Smart. To do so, select Settings >
Advanced settings > Factory settings.
2. On your telephone, erase the Parrot system from the list of Bluetooth peripherals
(or reboot your iPod).
3. Repeat the pairing procedure for the 2 devices.

Parrot ASTEROID Smart Specifications

General

MP3 playback	Yes
CD-R playback	No
Video formats supported	H.264
Output power	55 W
Product color	Black
Volume control	Digital
Equalizer bands quantity	7
Mobile operating systems supported	Android 2.3
Display diagonal	6.2 \
Bluetooth range	10 m
Bluetooth version	3.0+HS
Bluetooth profiles	A2DP, AVRCP, HFP, HSP, OPP, PBAP, SPP
Line outputs (RCA)	1
USB ports quantity	4
Headphone connectivity	3.5mm
Wireless range	100 m