Parsun F40 EFI User Manual

17
Basic maintenance
Maintenance Interval Chart
Project
Content
Initial maintenance
General
maintenance
interval
10 hours
(1 month)
50 hours
(3
months)
100
hours
(6
months)
200
hours
(1 year)
Anode
Check/replace
○
○
Anode (internal)
Check/replace
○
Cooling water
channel
Clean
○
○
Spark plug
Clean/adjust/replace
○
○
Grease filling point
Add grease
○
Fuel filter
Check/replace
○
○
○
Fuel system
Check
○
○
○
Fuel tank
Check/clean
○
Idle speed
Check/adjust
○
○
Engine oil
Replace
○
○
Oil filter
Replace
○
Valve clearance
(OHC)
Check/adjust
○
○
Ignition timing
Check
○
○
Thermostat
Check
○
Gear oil
Replace
○
○
Water pump
Check
○
Propeller and cotter
pin
Check/replace
○
○
Timing belt
Check/replace
○
○
Throttle cable
Check/adjust
○
Shift lever/shift
cable
Check/adjust
○
Note:
Flush the outboard motor with fresh water immediately after running in salt water,
sewage or muddy water.
If leaded gasoline is used frequently, check the valve and related parts every 100
hours.
Warning:
The timing belt needs to be replaced every 1000 hours (5 years); Avoid engine damage
or injury accident caused by sudden fracture of timing belt due to aging.
Fuel system
1. Check the fuel tank, fuel pump and fuel pipe.
Check the fuel tank, fuel pump and fuel pipe for leakage or damage, and replace them if
necessary.
Check the fuel filter core on the fuel tank for dirt, and clean or replace it if necessary.

Parsun F40 EFI Specifications

General

Brand	Parsun
Model	F40 EFI
Category	Outboard Motor
Language	English