Partner PT-6212 - Standard CMOS Features; Figure 2.2 Standard CMOS Features Menu

8 C H A P T E R 2 B I O S S E T U P
Standard CMOS features
Selecting Standard CMOS Features on the main menu displays the following menu:
Date and Time
The Date and Time items show the current date and time held by the machine. If you are running a Windows
OS, these items are automatically updated whenever you make changes to the Windows Date and Time
Properties utility.
Video
These elds is used to select the default video device.
Halt On
This item denes the operation of the system POST (Power On Self Test) routine. You can use this item to
select which types of errors in the POST are sufcient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time. These are display-only elds. You
cannot make changes to these elds.
Base Memory – This eld displays the amount of conventional memory detected by the system during •
boot.
Extended Memory – This eld displays the amount of extended memory detected by the system dur-•
ing boot.
Total Memory – This eld displays the total amount of memory (Base and Extended) detected by the •
system during boot.
Standard Figure 2.2
CMOS Features menu
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Mon, Jul 6 2009
Time (hh:mm:ss) 8 : 33 : 14
IDE Channel 0 Master ► [ None]
IDE Channel 0 Slave ► [ None]
IDE Channel 2 Master ► [ST380815AS]
IDE Channel 2 Slave ► [ None]
IDE Channel 3 Master ► [ None]
IDE Channel 3 Slave ► [ None]
Video [EGA/VGA]
Halt On [All , But Keyboard]
Base Memory 640K
Extended Memory 409472K
Total Memory 490496K
Item Help
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults