CPU Feature
Selecting CPU Feature opens up this screen.
Phoenix - AwardBIOS CMOS Setup Utility
CPU Feature
Delay Prior to Thermal [16 Min]
Thermal Management Thermal Monitor 1
Execute Disable Bit [Enabled]
Item Help
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CPU Feature Figure 2.5
submenu
Delay Prior to Thermal
The Delay Prior To Thermal BIOS feature controls the activation of the Thermal Monitor’s automatic mode.
It allows you to determine when the Pentium 4’s Thermal Monitor should abe activated in automatic mode
after the system boots. For example, with the default value of 16 minutes after the system starts booting up.
Execute Disable Bit
When disabled, forces the XD feature ag to always return 0.
To Next Page
Loading...
