EasyManua.ls Logo

Pasquali Mars 8.75 EP - Power Take-Off (PTO) Controls

Pasquali Mars 8.75 EP
154 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
I
GB
7.4
COMANDI PRESA DI POTENZA
(31) Leva selezione presa di potenza
Consente di selezionare i diversi modi di fun-
zionamento della presa di potenza:
Pos. b INDIPENDENTE - La presa di
potenza deriva il moto direttamente
dal motore; la sua velocità di rota-
zione è proporzionale a quella del
motore stesso.
NOTA
La trattrice può essere dotata di PdP
a 540-750 giri/min oppure a 540-1000
giri/min.
Con la leva (32) in pos. “d” la rota-
zione è di 750 o 1000 giri/min a
secondo della versione; con la leva
(32) in pos. “e” la rotazione è di
540 gir/min .
Pos. c SINCRONIZZATA - La velocità della
presa di potenza è proporzionale alla
velocità di marcia della trattrice; il
senso di rotazione è sinistrorso in
marcia avanti.
NOTA
Per l'applicazione di rimorchi a ruote
motrici (giri PdP per 1 giro ruota):
- Con leva 32 in pos."d" si hanno
6,990 (vers. 540/750), oppure 10,198
(vers. 540/1000) giri PdP/1 giro ruota.
- Con leva (32) in pos. “e” si hanno
5,501 giri PdP/1 giro ruota.
(32) Leva selezione velocità
Consente di selezionare due velocità di rota-
zione della presa di potenza, come descritto
al punto (31).
PTO CONTROLS
(31) PTO control lever
Used to select the different PTO operating
modes:
Pos. b INDEPENDENT - the PTO receives
its drive directly from the engine. Its
Rpm are proportional to the
engine's.
NOTE
The tractor can be supplied with PTO
speed 540-750 Rpm or 540-1000
Rpm.
When lever (32) is in pos.d”, rota-
tion speed is 750 or 1000 Rpm; when
lever (32) is in pos. “e”, the rotation
speed is 540 Rpm (slow).
Pos. c SYNCHRONIZED - PTO speed is
proportional to the tractor's driving
speed. Its turning direction is left in
forward gears.
NOTE
For wheel drive trailer (PTO turns for
every wheel circle):
- When lever (32) is in pos.d there
are 6.990 PTO turns (540/750 PTO
ver.), or 10.198 PTO turns (540/1000
PTO ver.) for every complete wheel
circle.
- When lever (32) is in pos.e there
are 5.501 PTO turns for every com-
plete wheel circle.
(32) PTO speed selection lever
Used to select PTO turning speed as descri-
bed in sub-section (31) above.

Table of Contents

Related product manuals