PATCHWORK BlackBox air - Guidance Line Operations; Finishing a Job

9
Setting and Using a Guidance Line
4) If working the headland pass,
continue around then line up to the set
AB line and use the guidance to work
the inner areas of the eld.
5) When turning in the headland the
next AB line will appear.
To complete a eld boundary map or guidance job to start a new one, press the Menu
button and then Next Job to do a different job with the same settings or Finished Job to
return to the Home screen.
To power off the BlackBox press Shutdown, then press Yes and disconnect from power
supply.
Finishing a Job