PAX A920 Reference Guide

v1.0 | 11
A920 REFERENCE GUIDE
6 AC Power Connection
The A920 can be powered two ways:
• By plugging the power supply and power cord into the Micro USB port on the side of the A920.
• If the optional Charging Base is included, by plugging the power supply with power cord into the
Charging Base power port and seating the A920 on its Charging Base.
WARNING
DO NOT connect the other end of the power source until all the
other cables are connected first. Plugging in the power cord to
the power source before the other cables are installed may
result in damage to the terminal or connected devices.
After all terminal cables are connected, plug the terminal AC power cable to the power source.
WARNING
Do not disconnect the power supply while applications are
being downloaded to the terminal. The applications could be
downloaded improperly, or the Flash memory could be
damaged.

PAX A920 Specifications

General

Display Resolution	720 x 1280 pixels
Printer Speed	80mm/s
Security	PCI PTS 5.x approved
Operating System	Android
Display	5.5" IPS Touch Screen
Connectivity	4G, Wi-Fi, Bluetooth
Printer	Built-in thermal printer
Card Readers	Magnetic Stripe, Smart Card, Contactless
Camera	5MP rear camera
Ports	1 x Micro USB
Certifications	PCI PTS 5.x, EMV L1 & L2
Processor	Quad-core Cortex A7