PAX A920 Reference Guide

v1.0 | 27
A920 REFERENCE GUIDE
12. Setting Up Communications
The A920 terminal supports LAN, Wi-Fi, and 4G communications for computer network and internet
access. Available access types of Wi-Fi on the A920 terminal are DHCP, Static IP, Manual Static IP, and
Manual Proxy.
12.1 Wi-Fi Connection
Note: Please refer to the owner's manual of the modem and Wi-Fi access point for connection and
configuration information.
The A920 supports Wi-Fi for network and internet access. Wi-Fi is a wireless computer network that
links two or more devices using wireless communication to a local area network (LAN) within a limited
area, such as store or office building.
Available access types of Wi-Fi on the A920 are DHCP, Static IP, Manual Static IP, and Manual Proxy. The
following sections include step-by-step procedures for setting up each of these communication types.

PAX A920 Specifications

General

Display Resolution	720 x 1280 pixels
Printer Speed	80mm/s
Security	PCI PTS 5.x approved
Operating System	Android
Display	5.5" IPS Touch Screen
Connectivity	4G, Wi-Fi, Bluetooth
Printer	Built-in thermal printer
Card Readers	Magnetic Stripe, Smart Card, Contactless
Camera	5MP rear camera
Ports	1 x Micro USB
Certifications	PCI PTS 5.x, EMV L1 & L2
Processor	Quad-core Cortex A7