PAX A920 Reference Guide

v1.0 | 20
A920 REFERENCE GUIDE
11. Basic Operation Instructions
This section is intended to demonstrate how to power on and off the A920
11.1 Power ON
To turn the device on, plug the micro USB cable into the micro USB port. The device will automatically
power on and begin charging the battery. Once the battery has been sufficiently charged, you may
unplug the micro USB cable, and while the battery retains a charge, it may be powered on using the
power button on the right-hand side of the device.
11.2 Power OFF Terminal
To turn the device off, press the power button on the right-hand side of the device, seen in the image
above. A screen will appear that gives you the option to Power Off the device. Simply tap the screen and
the device will shut down.
Micro USB Port
Power Button

PAX A920 Specifications

General

Display Resolution	720 x 1280 pixels
Printer Speed	80mm/s
Security	PCI PTS 5.x approved
Operating System	Android
Display	5.5" IPS Touch Screen
Connectivity	4G, Wi-Fi, Bluetooth
Printer	Built-in thermal printer
Card Readers	Magnetic Stripe, Smart Card, Contactless
Camera	5MP rear camera
Ports	1 x Micro USB
Certifications	PCI PTS 5.x, EMV L1 & L2
Processor	Quad-core Cortex A7