To Next Page

To Previous Page

v1.0 | 28

A920 REFERENCE GUIDE

12.2 DHCP Wi-Fi Connection

The A920 supports DHCP setup for network and internet access. DHCP stands for Dynamic Host

Configuration Protocol. DHCP is a network management protocol used in IP networks. The DHCP server

dynamically assigns an IP address and other network configuration parameters to each device on the

network.

To set up DHCP:

1. First, navigate to the “Settings” app in the bottom right-hand side of the home screen. Once you have

located the “Settings” app, tap on the icon to open the settings menu. A password prompt will appear on

the screen. Type the default password “9876” into the password input and select “OK” to access the device

settings.

Other manuals for PAX A920

Questions and Answers:

Need help?

Do you have a question about the PAX A920 and is the answer not in the manual?

General

Display Resolution	720 x 1280 pixels
Printer Speed	80mm/s
Security	PCI PTS 5.x approved
Operating System	Android
Display	5.5" IPS Touch Screen
Connectivity	4G, Wi-Fi, Bluetooth
Printer	Built-in thermal printer
Card Readers	Magnetic Stripe, Smart Card, Contactless
Camera	5MP rear camera
Ports	1 x Micro USB
Certifications	PCI PTS 5.x, EMV L1 & L2
Processor	Quad-core Cortex A7