PAX PX7 - Selecting ECR Communication Type; Confirming the Communication Port; Setting Communication Protocol to TCP;IP; Accessing LAN Parameters

8
6. Tap on ECR Comm. Type or press 3 on the
keypad.
7. Tap on Ethernet or Press 3 on the
keypad.
8. Confirm the Communication port is 10009
Press green button on the keypad.
Make a note of this. Will need it later, to enter
this information into CRE.
9. Tap on TCP/IP or press 1 on the keypad.
Note: It will return you back to the
communication options Menu
10. Navigate back to page 2,
Tap on LAN Parameters or press 2 on the
keypad.