PAX S300 Manual

13 | P a g e
Configuring the PAX communication port for TCP/IP only (no serial connection)
Communication between the PAX, PC, and payment processing done over TCP/IP.
1. Tap on the onscreen Menu
button.
2. Enter the default password
“916860” then press the green
key on the key pad.
If the default password does not
work, you will need to contact your
payment processor for assistance.

PAX S300 Specifications

General

Processor	32-bit ARM11
Security	PCI PTS 3.x approved
Card Readers	Magnetic Stripe, Contactless
Connectivity	RS232, USB, Ethernet
Memory	128MB Flash, 64MB SDRAM