PAX S300 Manual

66 | P a g e
Performing a settlement/batch close and Setting up Auto Settlement
If performing Manual Settlements, settling must be done on each station that has a PAX device.
Alternatively, if setting up Auto Settlement, this must be enabled on each station that has a PAX device.
NOTE: using Auto Settlement is NOT recommended if you are set up to take tips.
1. To Manually Settle:
From the Manager/Option
screen, click/tap on
Administrative > Credit Card
Settlement.
2. Click/tap on Settle.

PAX S300 Specifications

General

Processor	32-bit ARM11
Security	PCI PTS 3.x approved
Card Readers	Magnetic Stripe, Contactless
Connectivity	RS232, USB, Ethernet
Memory	128MB Flash, 64MB SDRAM