EasyManuals Logo

PAX S300 Manual

PAX S300
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
24 | P a g e
13. Confirm the IP Address
displayed is the same as what
you noted in step 9.
Alternatively, you may assign
a different IP address by
tapping on the blue arrow
once or pressing the red key
with the X, then using the
number pad to enter a new IP
address; hit the green key to
save your changes.
You will need to enter the IP
Address as 12 digits, e.g. if the
IP Address you are entering is
172.25.1.30, this will have to
be keyed in as
172.025.001.030.
Take note of the new IP
address then press the green
key with the arrow to save
your changes.
Press the red button with the
X repeatedly until you are back
at the INSERT/SWIPE
ANYTIME screen.
Note: If you do not know how to obtain an IP
address, you may need to contact your
network administrator.

Other manuals for PAX S300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PAX S300 and is the answer not in the manual?

PAX S300 Specifications

General IconGeneral
Processor32-bit ARM11
SecurityPCI PTS 3.x approved
Card ReadersMagnetic Stripe, Contactless
ConnectivityRS232, USB, Ethernet
Memory128MB Flash, 64MB SDRAM

Related product manuals