PBI DCH-5100P - Configure Decoder Settings

ООО «ТЛК Трейд» | 196158, г.Санкт-Петербург, Пулковское шоссе, д.30, корп.4, оф. 213В (юр.) | ИНН 7810592830 КПП 781001001
р/с 40702810068000007550 | к/с 30101810200000000704 | Филиал ОПЕРУ ОАО Банк ВТБ в Санкт-Петербурге | БИК 044030704
ОКПО 66035862 | ОКАТО 40284565000 | ОГРН 1107847196060 | т.(812)6499888 | http://www.tlct.ru http://www.rftel.ru
ООО «ТЛК Трейд», Санкт
-
Петербург
+7 812 64 99 888
mail@tlct.ru
Set parameters of decoder. There are three subpages, Program page, Video Output page and Audio
Output page. In the Program subpage, user can set the parameters of output program. Click “Apply”
button to submit, or click “Cancel” button to cancel.
Menu Name Description
Source
To configure the decoder source, user can select Tuner Input, ASI-1 Input, ASI-2
Input, IP Input or Remux Input.
Current Program
To show which program should be decoded.
Program List
Programs which can be selected.
Decoder Mode
To configure which program should be decoded when the decoder source is
changed, user can select between First Service and Program Manual Selection.
A/V Alarm Switch
To enable or disable the A/V alarm, user can choose between On and Off.
In the Video Output subpage, user can set the video parameters of output program. Click “Apply”
button to submit, or click “Cancel” button to cancel.