To Next PageTo Next Page
Need help?Do you have a question about the PBI DCH-5100P and is the answer not in the manual?
Instructions for operating the DCH-5200P using its front panel and LCD interface.
Setting tuner input parameters to lock the correct satellite and receive signals.
Configuring decoder source, program selection, video, and audio output parameters.
Configuring TS over IP function, including IP board type and input/output settings.
Configuring device settings like product name, IP control, factory defaults, and upgrades.
Instructions for upgrading firmware using a USB key, including file placement and process.
Instructions for operating the DCH-5200P using its front panel and LCD interface.
Setting tuner input parameters to lock the correct satellite and receive signals.
Configuring decoder source, program selection, video, and audio output parameters.
Configuring TS over IP function, including IP board type and input/output settings.
Configuring device settings like product name, IP control, factory defaults, and upgrades.
Instructions for upgrading firmware using a USB key, including file placement and process.
General| Input Impedance | 75 Ohms |
|---|---|
| RF Connector | F-type |
| Output Impedance | 75 Ohms |
| Weight | 3 kg |
| Power Supply | AC 100-240V, 50/60 Hz |
| Operating Temperature | 0°C to 45°C |
