P550c Operation Manual
6 Operating the system
www.pearpoint.com | 166
If the rod is fully coiled on the reel, press the Calibrate button.
If the rod is not fully coiled on the reel, rewind the rod completely. Then press Calibrate.
Fig. 6.18 Calibration reminder. 1 Advisory to rewind the rod. 2 Calibrate button.
If you connect a pushrod directly to the P550 controller, ie without using a powered drum or manual PSU
in between, you will be shown the following Equipment settings menu. Again, select the reel you have
connected.
To Next Page
Loading...