P550c Operation Manual
5 System setup
www.pearpoint.com | 128
5.7 Import a company logo
You can import your company logo to personalize the controller splash screen (shown briefly on startup)
and the title page of exported survey reports.
Follow these steps:
1 Copy the logo image (PNG or JPG only) to a USB memory stick and attach the stick to the controller.
You can use any of the controller’s USB ports.
Note: The image file must be smaller than 2MB.
2 In the Home screen, press the Settings button (item 6 on page 33).
3 Choose Settings > Company Details.
4 Scroll to the bottom of the Company Details menu and choose Select company logo.
a. In the Image Import screen, select the logo.
Use the arrow keys and the Esc and Enter keys to navigate folders on the USB memory stick
and select the file you want.
b. Press Enter or the OK button to import the logo.
5 Back in the Company Details menu, the Company logo is automatically set to Active.
To Next Page
Loading...