P550c Operation Manual
5 System setup
www.pearpoint.com | 127
5 You will shortly be emailed a cert.asc file. Copy this to a USB stick, which should be put into one of
the USB ports on the P550 controller
6 Return to the Feature enable menu, navigate to Install feature enable certificate and press Select.
7 Navigate to the folder on the USB stick containing the cert.asc file, highlight the cert.asc file and
press Select.
This will result in a message saying that the feature has been installed successfully, and the cert.asc file
should now be listed in Enabled features. If this is not the case, please contact your local Pearpoint
representative.
Company details
Use this screen to enter your company details and, if required, your company logo. The controller will
use these details to personalize the title page of your survey videos and reports.
After entering your company’s details, you will not need to re-enter them unless you perform a
factory reset; see page 259.
To import a company logo, see page 128.
To Next Page
Loading...