P550c Operation Manual
10 Maintenance and cleaning
www.pearpoint.com | 259
10.3 Factory reset
This section describes how to perform a factory reset. This will restore the controller to its original state,
erasing any configuration settings currently defined on the device. You must only perform a factory reset
if instructed to do so by Pearpoint technical staff.
Follow these steps:
1 In the Home screen, press the Settings button (item 6 on page 33).
2 Choose Settings > Maintenance > Factory Reset.
3 When the controller restarts, a setup wizard launches automatically. The wizard comprises several
menus where you can set preferences and basic details.
Briefly, you will need to re-specify the language, the system date & time, the keyboard layout and
your preferred distance units (feet or meters). The wizard also prompts you for your company details;
the controller will use these details to personalize the title page of your survey reports.
For full details about the setup wizard, see page 95.
To Next Page
Loading...