P550c Operation Manual
8 WinCan PC connections
www.pearpoint.com | 241
7 Set the DNS server to 169.148.1.121
8 Select Save & Exit to return to Network settings
9 Confirm that the Ethernet IP matches your selected IP address
10 Confirm that the P550c controller’s Ethernet icon in the top right hand corner of the display shows
that the connection is enabled as shown in Figure 8.1.
A line through the icon, , means that you do not have connection. Please repeat the steps
above to ensure all values have been entered correctly.
11 Select Enable remote control.
To Next Page
Loading...