P550c Operation Manual
8 WinCan PC connections
www.pearpoint.com | 244
15 Right click the DVC2 Ethernet connection and select Properties.
16 Double click Internet Protocol Version 4.
17 Select Use the following IP address.
18 Enter the IP address 169.148.1.121.
19 Set the Subnet mask to 255.255.255.0.
20 Click on OK to leave Internet Protocol Version 4.
21 Select OK again to leave Ethernet DVC2 Properties.
22 Open WinCan VX.
23 In the WinCan screen go to
Home > Settings > OSD > Select device
24 Select Pearpoint - P350.
25 Select Configure the device.
26 Enter the IP address from the P550c controller (eg 169.148.1.120) into the IP address field
To Next Page
Loading...