Pearpoint Flexitrax P550c - Page 253

P550c Operation Manual
8 WinCan PC connections
www.pearpoint.com | 253
30 Select OK (√) to return to WinCan VX Settings page.
31 Select OK (√) to return to the main WinCan VX page
32 Select Projects and open a new or an existing project.
33 Select Set distance and enter a new distance and select OK (√).
34 Confirm the new distance is displayed on the controller.
You will now be able to control the crawler, the camera and the rest of the P550c system from the PC.