P550c Operation Manual
10 Maintenance and cleaning
www.pearpoint.com | 257
Rod guide assembly (pushrods only)
Always make sure the rod guide is clean.
Check the rod guide assembly regularly to see if a replacement is needed. Spare rod guides can be
purchased and fitted by competent mechanical technicians using a screwdriver. Spare rods and various
components are available to purchase as repair kits.
Caution: If the rod wears through the rod guide, it will start to wear through the metal structure of the
coiler. Wear to the metal components can cause hazards for the operator (sharp edges or electrical
malfunction).
Fig. 10.1: Rod guides.
For servicing information, contact Pearpoint Technical; see page 22. Or contact your Pearpoint
representative.
To Next Page
Loading...