1 Pushrod reel: The pushrod can be up to 500ft
(150m) in length, depending on reel type.
2 Stowage hooks: Use for storing the link cable
on the pushrod reel.
3 Link cable socket: Connects the link cable to
the reel.
4 Brake: Not shown. Located on reverse side of
reel. Adjustable to control the movement of the
reel, or to lock it.
5 Pushrod guide: Guides the rod on and off the
reel. Must be kept clean.
6 Adaptor clamp: Allows the controller to be
mounted onto the pushrod reel.
To Next Page
Loading...