P550c Operation Manual
4 System assembly
www.pearpoint.com | 52
The abrasive wheel kits have been designed to enhance
grip, boosting the distance and capability of your flexitrax
P550c system in a wide-range of applications. Particularly
recommended for brand new plastic, greasy, or ‘relined’
pipes where grip with standard rubber wheels can be
challenging.
These are available in 5 kits with suitable adaptors for pipe
size (6”, 8” and 9” pipes). The small abrasive rasp wheels
should use the 62mm wheel size setting, while the large
abrasive rasp wheels should use the 110mm wheel size setting.
84mm ‘Slim Profile’ Wheels
84mm wheels improve performance in areas where the pipe
diameter decreases, typically joint offsets and areas with
reasonable debris buildup. The slimmer profile of the unit
allows a greater chance of passing through these tight areas.
Adaptors are required to attach these wheels to the P550c.
Caution! When using the 84mm wheels with the 84mm wheel adaptor, select 84mm size wheels in the
Fig. 4.3: Abrasive wheels fitted to a
P556
Fig. 4.4: Kit of 84mm wheels
To Next Page
Loading...