Important Safety Warnings
Warnings
Before you begin programming, please read the important
safety warnings below.
• Never go inside the drive enclosure. The capacitor bank holds a 230 volt
charge, even if there is no power to the unit.
• Do not submerse the IntelliFlo
®
VF Variable Flow Pump.
• The pump is capable of 130 GPM or 110 feet of head. Use caution when
installing and programming to limit pump performance when plumbed with
old or questionable equipment.
• Manual mode shuts off all sensors, including Suction Blockage. Use only
when metering the system, or in an emergency.
• The pump should be wired for constant power. The pump is designed to
turn itself on and off.
• Always stop the pump before performing maintenance.
3
IntelliFlo
®
VF Pump Quick-Start Guide
To Next Page
Loading...
