Features 1 and 2 Press to scroll to Features menu
(Features are found in the Time/Cont menu).
Features 1 and 2 allow manual operation of assigned water features with a range
of 0-600 minutes each. For example, Feature 1 can be assigned to Spa operation,
and Feature 2 to the Automatic Cleaner. Features 1 and 2 need to be programmed
for Flow and Duration. They are manually activated by pressing the Feature Button,
and then Start/Stop. The Feature’s LED light will come on, and the screen will start
to subtract time in minutes from your programmed duration time. You can also
scroll with the buttons to monitor power, speed, or flow.
Setting Flow Rate Press to access Feature 1 or Feature 2 Set Flow.
Press and to select digit to modify. Change values by pressing and
When value is set, press to confirm value and save changes.
Setting Duration Press to access Feature 1 or Feature 2 Duration.
Change values by pressing and .
When value is set, press to confirm value and save changes.
Enter
Enter
IntelliFlo
®
VF Pump Quick-Start Guide
14
To Next Page
Loading...
Need help?
General
