Pentair Siata V132 SFE - Page 22

Installer manual Siata V132 - SFE - Description
22 / 88 Ref. MKT-IM-003 / B - 19.04.2017
Note
There is no automatic bypass during a fast rinse cycle. But once the mixing device has been
set, it connects the inlet and outlet of the valve.
So during the fast rinse phase with a mixing device, it is possible that a flow of untreated
water flows into the outlet.
Additional hydraulic controls (driver replica)
The valve can be equipped with two pairs of connectors for duplicating the position of the hydraulic
controls. In order to use the valve, which is delivered with this option, simply remove the blue plugs,
at the bottom of the valve, to put a 6 mm flexible tube into the quick connections.
A
Flow rate [l/min] at 15 °C
Mixing valve performance
Mixing valve opening position
3 [bar]
2.5 [bar]
2 [bar]
1.5 [bar]
1 [bar]
Pilot chamber under pressure
Driver replica