To Next PageTo Next PageWhy my Pentax KC-01 does not turn on?
Your Pentax Digital Camera might not be turning on because a battery is not installed. Ensure a fully charged battery is properly installed. Alternatively, the battery power might be low. In this case, install a fully charged battery.
Why autofocus does not work on my Pentax KC-01 Digital Camera?
Autofocus may not work on your Pentax Digital Camera due to several reasons. The subject may be difficult to focus on if it has low contrast, dark colors, intricate designs, or is a rapidly moving object. Try locking focus on an object at the same distance or use manual focus. Also, ensure the subject is within the AF area on the monitor. If the subject is too close, move away and try again. Finally, check that the focus mode switch is set to = and not \.
What to do if the shutter cannot be released on Pentax Digital Camera?
If the shutter cannot be released on your Pentax Digital Camera, it could be due to several reasons. If the built-in flash is charging, wait until it finishes. Also, check if the SD Memory Card is full; if so, insert a card with available space. Ensure the camera isn't currently recording and wait until it finishes. If the lens aperture ring is not set to the s position, set it to s or select [Enable] in [16. Using Aperture Ring] of the [A Custom Setting 3] menu.
How to fix Shake Reduction when it is not working on Pentax KC-01 Digital Camera?
If Shake Reduction is not working on your Pentax Digital Camera, first ensure that the Shake Reduction function is set to Q (On). If you are using a lens for which the focal length information cannot be obtained, set the focal length in the [Input Focal Length] screen. If the shutter speed is too low, set [Shake Reduction] to R (Off) and use a tripod. If the subject is too close, move away from the subject, or set [Shake Reduction] to R and use a tripod.
Why doesn't the built-in flash discharge on my Pentax KC-01 Digital Camera?
The built-in flash on your Pentax Digital Camera might not discharge because, if the flash mode is set to C or C, the flash will not discharge if the subject is bright. Set the flash mode to E (Manual Flash Discharge) or F (Manual Flash+Red-eye Reduction). If a mode is set, set the mode dial to any mode other than a (Flash Off). Also, if K, d, A, Z, y, U, n, or E of H mode is set, set H mode to any mode other than K (Sunset), d (Blue Sky), A (Night Scene), Z (Night Scene HDR), y (Backlight Silhouette), U (Candlelight), n (Stage Lighting) or E (Museum).
What to do if USB connection with a computer does not work properly for Pentax Digital Camera?
If the USB connection with a computer is not working properly for your Pentax Digital Camera, it might be because the USB connection mode is set to [PTP]. Change this by setting [USB Connection] to [MSC] in [Interface Options] of the [R Set-up 2] menu.
Why AE Lock function does not operate on Pentax KC-01 Digital Camera?
The AE Lock function does not operate on your Pentax Digital Camera because p mode is set. AE Lock is not available in p mode.
Why the power zoom system does not work on Pentax KC-01?
The power zoom system may not work on your Pentax Digital Camera if the camera does not have a power zoom function. In this case, use manual zoom.
General| Sensor Type | CMOS |
|---|---|
| Image Processor | PRIME M |
| Continuous Shooting | Yes |
| Video Resolution | Full HD 1080p |
| Video Recording | Yes |
| Display Type | LCD |
| Viewfinder | No |
| Camera type | Compact |
| Sensor Size | 1/2.3-inch |
| Megapixels | 16 MP |
| Effective Pixels | 16 MP |
| ISO Range | 100-6400 |
| Autofocus Points | 9-point |
| LCD Screen | 3 inches |
