111
Shooting Functions
4
You can create a picture by taking multiple exposures and merging them
into a single image.
1
Select [Multi-exposure] in the [A Rec. Mode 2] menu, and
press the four-way controller (5).
The [Multi-exposure] screen appears.
2
Use the four-way controller (23) to select [Number of
Shots], and press the four-way controller (5).
3
Use the four-way controller (23)
to select the number of shots,
and press the 4 button.
Select from 2 to 9 shots.
4
Use the four-way controller (23) to select [Auto EV
Adjustment], and use the four-way controller (45) to
select O (On) or P (Off).
When set to O, the exposure is adjusted according to the number of
shots.
5
Use the four-way controller (23) to select [Start
shooting], and press the 4 button.
The camera is ready to take a series of pictures.
Multi-exposure
• Multi-exposure is not available in the following situations.
- when Z (Night Scene HDR) of H mode, p mode, or C mode is set
- when Exposure Bracketing, Interval Shooting, Distortion Correction, Lat-
Chromatic-Ab Adj, Digital Filter or HDR Capture is set
Cancel
MENU
Multi-exposure
2
times
Start shooting
OK
OK
Number of Shots
Auto EV Adjustment
To Next Page
Loading...
