98
Shooting Functions
4
Manually adjust the focus.
1
Set the focus mode to \.
2
While viewing the monitor, turn
the focusing ring.
The shutter can be released by pressing
the shutter release button fully even if the
subject is not in focus.
3
When it is difficult to check the focus, press the 4
button.
The image on the monitor is magnified.
Available operations
4
Press the
4
button or the shutter release button halfway.
The camera returns to standby mode.
Adjusting the Focus Manually (Manual Focus)
Four-way controller (2345) Moves the display area.
d (G) button Changes the display area to the center.
When [Focus Peaking] is enabled in [AF/MF Settings] of the [A Rec. Mode 1]
menu, the outline of the subject in focus is emphasized and makes it easier to
check the focus. When [Focus Peaking] is assigned to the d (G/R) button, the
Focus Peaking function can be turned on or off by pressing the d (G/R) button.
(p.147)
x4
To Next Page
Loading...
