32
Before Using Your Camera
1
In standby mode, you can switch to the control panel and change settings.
Below, how to set [JPEG Quality] is explained as an example.
1
Press the M button in
standby mode.
The control panel appears.
2
Use the four-way controller
(2345) to select an item you
want to change the setting for.
You cannot select items that cannot be
changed as a result of current camera
settings.
3
Press the 4 button.
The setup screen of the selected item
appears.
Using the Control Panel
Custom Image
Bright
65535
JPEG Quality
37
To Next Page
Loading...
