Pentax KC-01 - Using the Menus

Before Using Your Camera
1
33
4 Use the four-way controller (45)
or e-dial to select a setting value.
5 Press the 4 button.
The camera returns to the control panel.
Next, set other items.
6 Press the 3 button or the shutter release button
halfway.
The camera is ready to take a picture.
This section explains how to use the following menus: [A Rec. Mode],
[C Movie], [Q Playback], [R Set-up] and [A Custom Setting].
Below, how to set [Slow Shutter Speed NR] in the [A Rec. Mode 2] menu
is explained as an example.
1 Press the 3 button in
standby mode.
The [A Rec. Mode 1] menu appears on
the monitor.
The menus listed below are displayed in
the following situations.
You can also change the setting by turning the e-dial after selecting the item
you want to change in Step 2 ([Recording Sound Level] for C mode can only
be set using this operation). Detailed settings such as for Custom Image and
Digital Filter can be changed after pressing the 4 button.
Using the Menus
When the mode
dial is set to C
[C Movie 1] menu
In playback mode [Q Playback 1] menu
JPEG Quality
JPEG Quality
128
128
OK
OK
OK
Cancel
Cancel
MENU