39
Getting Started
2
Inserting the Battery
Insert the battery into the camera. Use the exclusive battery D-LI90.
When using the battery for the first time, or when the battery has not been
used in a long time, or when [Battery depleted] appears, recharge the
battery.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible
cord, rated 125 V, 7A, minimum 6ft (1.8m)”
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Face the 2 mark on the battery up, and insert the battery
into the battery charger.
The indicator lamp lights up when charging and turns off when the battery
is fully charged.
Charging the Battery
Indicator lamp
AC plug cord
Battery charger
To Next Page
Loading...
