Pentax KC-01 - Setting the Playback Display Method

156
Playback Functions and Image Editing
6
Setting the Playback Display Method
You can set the initial magnification when magnifying images (p.157),
whether to display the Bright/Dark Area warning, and whether to
automatically rotate images that are captured with the camera held
vertically in the single image display.
1 Select [Quick Zoom] in the [Q Playback 1] menu, and
press the four-way controller (5).
2 Use the four-way controller (23)
to select the magnification, and
press the 4 button.
Select from [×16], [×8], [×4], [×2] or [Off]
(default setting).
3 Use the four-way controller (23) to select [Bright/Dark
Area] or [Auto Image Rotation], and use the four-way
controller (45) to select O (On) or P (Off).
4 Press the 3 button.
The screen that was displayed before selecting the menu item appears
again.
Bright/Dark Area
Bright (overexposed) portions blink red and dark
(underexposed) portions blink yellow. (p.29)
Auto Image Rotation
During playback, the image is automatically rotated
based on the rotation information when [13. Save
Rotation Info] (p.72) in the [A Custom Setting 2]
menu is set to [On].
The Bright/Dark Area warning is not displayed in Detailed Information Display
and RGB Histogram Display. (p.25)
Slideshow
Slideshow
Quick Zoom
Quick Zoom
Bright/Dark Area
Bright/Dark Area
Auto Image Rotation
Auto Image Rotation
Delete All Images
Delete All Images
MENU
1
Cancel
Cancel
OK
OK
OK
X16
X16
X8
X8
X4
X4
X2
X2
Off
Off