95
Shooting Functions
4
You can check the focus lock position (AF point) by magnifying the image
on the monitor, centering around the area in focus.
1
View the subject on the monitor, and press the shutter
release button halfway.
The autofocus system operates.
2
Press the 4 button while keeping the shutter release
button pressed halfway.
While the shutter release button is pressed halfway, the image on the
monitor is magnified centering around the AF point.
3
Use the e-dial to change the
magnification.
Magnification can be selected from 2 to 6
times.
4
Press the 4 button or stop pressing the shutter release
button halfway.
The camera returns to standby mode.
Checking the Focus
• When [AF Autozoom] is set to O (On) in [AF/MF Settings] of the [A Rec.
Mode 1] menu, the camera automatically magnifies the image 1 second after
the focus is locked.
•In \ mode, an image can be magnified by simply pressing the 4 button.
(p.98)
An image cannot be magnified when [Autofocus Method] is set to E
(Tracking).
x2
To Next Page
Loading...
