Pentax KC-01 - Page 143

141
Shooting Settings
5
2 Use the four-way controller (2345) to select [Custom
Image], and press the 4 button.
The Custom Image setting screen appears.
3 Use the four-way controller
(2345) to select an image
finishing tone.
The background image changes
according to the selected image tone.
Proceed to Step 8 if you do not need to
change the parameters.
4 Press the M button.
The screen to adjust the parameters appears.
5 Use the four-way controller (23)
to choose a parameter you want
to change.
The following parameters can be changed according to the selected
image finishing tone.
Image Tone Parameter
Bright/Natural/Portrait/
Landscape/Vibrant/
Radiant
Saturation: -4 to +4
Hue: -4 to +4
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness: -4 to +4
Muted/Bleach Bypass
Saturation: -4 to +4
Toning: Off/Green/Yellow/Orange/Red/Magenta/
Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness: -4 to 4
Cancel
Cancel
Parameter Adj.
Parameter Adj.
MENU
INFO
Bright
Bright
OK
OK
OK
Cancel
Cancel
MENU
Saturation
Saturation
OK
OK
OK