249
Appendix
10
Shake
Reduction does
not work
The Shake
Reduction function
is off
Set [Shake Reduction] to Q (On).
(p.100)
The focal length is
not set
If a lens for which the focal length
information cannot be obtained is used,
set the focal length in the [Input Focal
Length] screen. (p.234)
Shutter speed is too
low for the Shake
Reduction function
to be effective when
panning or shooting
night scenes, etc.
Set [Shake Reduction] to R (Off) and
use a tripod.
The subject is too
close
Move away from the subject, or set
[Shake Reduction] to R and use a
tripod.
Problem Cause Remedy
To Next Page
Loading...
