44
Getting Started
2
7
Plug the AC plug cord into the power outlet.
• Make sure the camera is turned off before connecting or disconnecting the
AC adapter.
• Make sure connections are secure between the terminals. SD Memory Card
or data may be corrupted if the connection to the power supply is lost while
the card is being accessed.
• While the AC adapter is in use, the connection cable is pulled out from the
bottom side of the camera, so remember that you cannot stand the camera
upright on a table, etc.
• After removing the DC coupler, return the connection cable cover to its
original location.
• When the AC adapter is connected to the camera, W is displayed as the
battery level.
• Be sure to read the manual of the AC Adapter kit K-AC1202 before using the
AC adapter.
To Next Page
Loading...
