57
Basic Operations
3
3
View the subject on the monitor.
When using a zoom lens, turn the zoom
ring to the right or left to change the angle
of view (focal length).
4
Position the subject inside the AF frame, and press the
shutter release button halfway.
The autofocus system operates.
The AF frame turns green and you will
hear a beep when the subject comes into
focus (focus lock).
When set to n mode, the optimal
capture mode is automatically selected
from U (Standard), c (Portrait), s
(Landscape), b (Macro), \ (Moving
Object), . (Night Scene Portrait), K
(Sunset), d (Blue Sky) or x (Forest).
(p.75)
The built-in flash pops up automatically when necessary.
5
Press the shutter release button fully.
The picture is taken.
This action is referred to as “releasing the shutter” or “release”.
6
Review the captured image on the monitor.
The image appears for 1 second on the monitor shortly after it is captured
(Instant Review).
1Setting the Display for Instant Review (p.191)
The following operations can be performed during Instant Review.
Available operations
E-dial Magnifies the image. (p.157)
K/i button Deletes the image. (
p.65)
m/c button Saves the image in RAW format. (p.64)
M
F
AF
1/
2000
F2.8
1600
[
37
]
AF frame
To Next Page
Loading...
