82
Shooting Functions
4
5 appears on the monitor for the value
that can be changed.
The following parameters can be
changed depending on the selected
exposure mode.
3
When set to a or L mode,
press the m/c button (1), and
then turn the e-dial (2) to change
the aperture value.
The exposure compensation value can
be adjusted by this operation in e, b, or
c mode. (p.84)
e
Item set in [Button Customization] of the [A Rec. Mode 3]
menu (p.150)
b/a/L
Shutter speed
c/p
Aperture value
• The proper exposure may not be obtained with the selected shutter speed
and aperture value when the sensitivity is set to a fixed value (p.79).
•In a mode, the difference from the proper exposure is displayed in a bar
scale while the shutter speed or aperture value is adjusted. The exposure
value blinks red when the difference from the proper exposure becomes ±3.0
or larger.
• You can set the function of the d (G) button when the exposure mode is set
to a or L. Set in [Button Customization] of the [A Rec. Mode 3] menu.
(p.151)
1/
2000
F2.8
1600
[
37
]
1
2
To Next Page
Loading...
