Pentax KC-01 - Page 92

90
Shooting Functions
4
3 Press the 4 button.
If you select [Auto], [Off], [Low], [Medium] or [High], proceed to Step 7.
4 Use the four-way controller (23) to select [Setting], and
press the four-way controller (5).
The screen to set the noise reduction level according to the sensitivity
appears.
5 Use the four-way controller (23)
to select a sensitivity value, and
use the four-way controller (45)
to set the level of noise reduction
which is applied to the selected
sensitivity.
The sensitivity values displayed vary
according to the [1. EV Steps] and [2.
Sensitivity Steps] (p.72) settings made in the [A Custom Setting 1] menu.
Available operations
6 Press the 3 button.
The screen that was displayed in Step 2 appears again.
7 Press the 3 button twice.
The camera is ready to take a picture.
E-dial Switches between [High-ISO NR 1] and [High-ISO NR 2].
d (G) button Resets the set value.
MENU
High-ISO NR
High-ISO NR
100
100
200
200
400
400
800
800
1600
1600
3200
3200
6400
6400
1 2
Reset
Reset