Setting the Shooting Functions
35
3
Taking Pictures
Functions set with the [Capture Toolbar]
Functions set with the [Menu]
Item Description
Default
Setting
Page
Shooting
Mode
Sets the shooting mode according to the
shooting condition or your subject.
A
(Program)
p.42
Flash Mode
Sets the flash mode according to the
shooting condition.
, (Auto) p.56
Drive Mode
Sets the self-timer, continuous shooting
mode, and remote control.
9
(Standard)
p.69, p.70,
p.72
Focus Mode Sets the focus mode.
=
(Standard)
p.63
Information
Display
Sets the type of information displayed on
the LCD monitor.
Standard p.40
Item Description Default Setting Page
Recorded
Pixels
Sets the number of recorded pixels of
pictures.
P (2816×2112) p.49
Quality Level Sets the quality level of pictures. D (Better) p.49
White Balance
Adjusts the color balance according to
the light conditions.
F (Auto) p.58
Focusing
Area
Chooses the focusing area. J (Multiple) p.65
Focus
Limiter
Limits the focus range. On p.66
Aux.AF
Light
For choosing whether to use the
auxiliary AF light when shooting in dimly
lit locations.
On p.66
AE Metering
For choosing which area of the image to
measure for determining the exposure.
L
(Multi-segment
metering)
p.55
Sensitivity Sets the ISO sensitivity. Auto p.67
EV
Compensation
Adjusts the overall brightness of the
picture.
±0.0 p.53
Instant Review
Sets the amount of time an image is
displayed on the LCD monitor after a
picture is taken.
1 sec. p.73
Sharpness For choosing sharp or soft outlines. G (Normal) p.60
Saturation Adjusts the color saturation. D (Normal) p.60
Contrast Adjusts the image contrast level. J (Normal) p.60
V Rec. Mode 1
AF Setting
W Rec. Mode 2
To Next Page
Loading...
Need help?
General
