Setting the Shooting Functions
37
3
Taking Pictures
Assigning a Function to the Capture Toolbar
1 Press the 3 button.
The [Menu] appears.
2 Touch [Common].
The Common screen appears.
3 Touch [Fn Setting].
The Fn Setting screen appears.
4 Touch the l icon you want to
assign a function to in the [Capture
Toolbar].
To assign a function to call up when taking
pictures, touch the l icon under A.
To assign a function to call up when recording movies, touch the l icon
under C.
5 Touch the icon of the function you
want to assign to the [Capture
Toolbar].
• The setting is saved and the screen returns
to the previous screen.
• If the function you want to assign does not
appear, touch [w] to advance the screen.
6 Repeat Steps 4 to 5 to assign the necessary functions.
7 Press the 3 button three times.
• The camera returns to Capture mode.
• Press the Q button to return to Playback mode.
Memo
To cancel a function assigned to the [Capture Toolbar], touch the l (Off)
icon
in Step 5.
OFF OFF OFF OFF
OFF OFF OFF OFF
Fn Setting
Fn Setting
Focusing
Area
White
Balance
Focus
Limiter
Recorded
Pixels
Quality
Level
A
OFF
off
To Next Page
Loading...
