102
3
Taking Pictures
6
Press the 4 button.
The frame appears on the display.
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
appears (p.81).
7
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
8
Press the shutter release button fully.
The picture is taken.
• The number of recorded pixels is fixed at h (2048×1536)/L
(1920×1080).
• You cannot turn off the LCD or change the display to “Simple Display
+ Subscreen” by pressing the 4/W button in N (Frame
composite) mode.
• At shipment, the camera includes 3 default frames and 42 optional
frames for each aspect ratio (4:3 and 16:9). (The CD-ROM supplied
with the camera contains a total of 90 frames, including the default
frames.)
Optional Frames
The optional frames are stored in the built-in memory in the Optio W90. These
optional frames are deleted if the files on the built-in memory are deleted with a
computer or the built-in memory is formatted. To reload the optional frames into
the built-in memory, copy the files from the CD-ROM (S-SW102) supplied with
the camera (p.208).
Adding a Frame to a captured image 1p.206
38
To Next Page
Loading...
