249
7
Settings
You can automatically transfer images or movies to a computer or similar
devices via wireless LAN using a commercially available Eye-Fi card.
For details on transferring images, refer to “Transferring Images Using
an Eye-Fi Card” (p.285). The default setting is P (Off).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Eye-Fi].
3
Use the four-way controller
(45) to select O or P.
O Turns on communication
using an Eye-Fi card
P Turns off communication
using an Eye-Fi card
4
Press the 4 button.
The setting is saved.
Setting the Eye-Fi Communication
• To establish an Eye-Fi communication, you first have to specify a
wireless LAN access point and transfer destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual
supplied with the Eye-Fi card.
• The Eye-Fi setting returns to the default setting when the camera is
turned off.
2/4
MENU
MSC
NTSC
Exit
Video Out
Folder Name
Date
Brightness Level
HDMI Out
Eye-Fi
USB Connection
Setting
Auto
To Next Page
Loading...
